|
BOTTOM DRIVEN CASED MINI PILES
The installation of bottom driven piles is quick and efficient.
A thin walled steel tube, closed ended, is driven in lengths of
2 to 6m using an internal drop hammer on to a dry concrete
plug. The tubes are joined by a full fillet weld as the installation
proceeds. The depth of the piles are designed using a
predetermined set or length criteria. Once the required depth
is reached the tube is filled with high slump concrete or grout. |
 |
1 Ton Mini Pile Driver
Weight: 800kg
Length: 1.4m
Height: 2.3m
Width: 700-900mm
Typical Pile Diameter: 150-200mm
Typical Load Capacity: 100-200kN
|
 |
2 Ton Mini Pile Driver
Weight: 1500kg
Length: 2.2m
Height: 2.4m
Width: 1000mm
Typical Pile Diameter: 150-300mm
Typical Load Capacity: 100-500kN
|
 |
12 Ton Mini Pile Driver
Weight: 12000kg
Length: 5m
Height: 7m
Width: 3m
Typical Pile Diameter: 200-350mm
Typical Load Capacity: 300-800kN
|
|
|
|
Small lightweight equipment
Low noise and vibration
No spoil to be removed
Minimal site preparation
Piles self-testing when
driven to a set |
|
